CL122-1溫度校驗儀 美國omege

CL122-1溫度校驗儀 美國omege

干體式校準器可在一個設備上同時提供加熱和冷卻功能。 具有“通用夾抓"來容納不規則形狀的傳感器
CL120 and CL134 Series
干體式校準器可在一個設備上同時提供加熱和冷卻功能。 具有“通用夾抓"來容納不規則形狀的傳感器

可加熱和冷卻的一個單元 采購的同時

通用的是理想的接受不規則形狀的探頭和傳感器 

便攜式現場或實驗室使用 

CE認證 

NIST校準可溯源證書

cl120系列校準冷/熱源

該cl120系列能夠加熱和冷卻的同時，在一個單位的采購都可以與一個或兩個模塊。你選擇模塊的組合：冷源，熱源，冷源和熱源，或兩個熱源。無論是冷熱源可與通用的下巴或“五孔塊。"

一個同時進行的冷卻和加熱的雙模塊系統是一個顯著的優點，因為溫度傳感器很少是只在一個溫度測試。zui常見的程序是在0°C測試（32°F）和在zui大溫度，從而表征偏移和增益誤差。兩個熱源系統也可能被命令。

NIST Calibration Traceability
Satisfies ISO and FDA Thermal Validation requirements
OMEGA certifies the accuracy of its products by using working standard test equipment that is compared to equipment calibrated yearly at NIST (National Institute of Standards and Technology) and redundant equipment calibrated at an independent lab that maintains standards traceable to NIST. This NIST traceable documentation is provided for each calibration including the actual calibration data.
CL134 Series Temperature Source/Measure
The CL134 Series has the same features as the CL120 but includes measurement capabilities. This additional feature simplifies the testing of temperature sensors by conveniently housing both the Source and Measure in one package. The CL134 Series has three distinct capabilities:
1. A COOL Source (either Universal Jaw or "five hole block") with range down to -30°C (-22°F)
2. A HEAT Source with range to 500°C (932°F) with Universal Jaw or range to 700°C (1292°F) with a "five hole block." The CL134 Series may be ordered with two HEAT Sources and no COOL Source.
3. Measures thermocouples, RTD's, Current and Voltage.

注釋: Note for CL120 Series:
Two COOL Sources not available in one instrument. Add "-230" suffix for 230 Vac power option and add $75 to price.
Note for CL130 Series
Add "-230" suffix for 230 Vac power option and add $75 to price. K, J, T, E, C, S, R, B, and N thermocouple types may be read with 0.1°C or °F resolution. RTDs (Resistance Temperature Detectors) may be tested in 2-, 3-, or 4-wire modes with alpha values of 0.385 or 0.392. The outputs of temperature transmitters may be read directly by the MEASURE unit in either mA or DC volts.

產品型號/產品描述
CL121-1 Block Calibrator with single module COOL universal jaw -30°C (-22°F)
CL121-2 Block Calibrator with single module HEAT universal jaw 500°C (932°F)
CL121-3 Block Calibrator with single module COOL 5-hole block -30°C (-22°F)
CL121-4 Block Calibrator with single module HEAT 5-hole block 700°C (1292°F)
CL122-1 Block Calibrator with dual module COOL universal jaw -30°C (-22°F), HEAT universal jaw 500°C (932°F)
CL122-2 Block Calibrator with dual module HEAT universal jaw 500°C (932°F)
CL122-4 Block Calibrator with dual module COOL 5-hole block -30°C (-22°F), HEAT 5 Hole Block 700°C (1292°F)
CL122-5 Block Calibrator with dual module HEAT 5-hole block 700°C (1292°F)
CL134-1 Block Calibrator with COOL universal jaw -30°C (-22°F), HEAT Universal Jaw 500°C (932°F), & measurement readout
CL134-2 Block Calibrator with dual mode HEAT universal jaw 500°C (932°F), & measurement readout
CL134-4 Block Calibrator with COOL 5 hole block -30°C (-22°F) HEAT 5-hole block 700°C (1292°F), & measurement readout
CL134-5 Block Calibrator with HEAT 5 hole block 700°C (1292°F), & measurement readout {dual heat sources

CL122-1溫度校驗儀 美國omege

CL23A校驗儀 美國omega